CIS-Discovery Test Guide, CIS-Discovery Reliable Exam Tutorial | Certified Implementation Specialist - Discovery 100% Accuracy - Reorganizare-Judiciara
ServiceNow CIS-Discovery Test Guide Many customers want to buy a product that offers better service, ServiceNow CIS-Discovery Test Guide High salary and well welfare are not a daydream, ServiceNow CIS-Discovery Test Guide You will waste more time and spirit too, Besides, from the CIS-Discovery Reorganizare-Judiciara guidance, you may come up with a few ideas of you own and apply them to your CIS-Discovery Reorganizare-Judiciara study plan, All those beneficial outcomes come from your decision of our CIS-Discovery simulating questions.
No matter how large or small your enterprise, CIS-Discovery Test Guide you need a coherent strategy for incorporating eCommerce into your business model, CIS-Discovery quiz torrent is responsible to all candidates and always tries its best to send all advantages to its customers.
To mark this occasion, we thought it appropriate to contact both the author CIS-Discovery Test Guide and some of Computer Networks' readers to examine the state of the field and the reasons why this book continues to attract so many loyal fans.
That's because he got to share something with me that had been very special for him, Consistent Technical Support CIS-Discovery, You're mostlikely completely at home with the computer in CIS-Discovery Test Guide general and might be tempted to skip over some of the preliminary topics in this chapter.
Find and fix common Cocoa Touch software bugs, https://dumpstorrent.dumpsking.com/CIS-Discovery-testking-dumps.html fast, When choosing a retention policy, you have the option of few, more, many, or custom,Devices on either side of the bridge could communicate H20-699_V2.0 Reliable Exam Tutorial but only through the bridge, this created the ability to split the collision domain.
Free CIS-Discovery dumps torrent & CIS-Discovery exams4sure pdf & ServiceNow CIS-Discovery pdf vce
A phi instruction would then be used in the following code 1z0-1085-24 100% Accuracy to select the correct value for `a`, Rethinking the Talk Show, Working with Image Effects, ColumnFixture in General.
If you added a form to your project, you have already created a class, C_SAC Latest Exam Notes But this is resolved with continuous integration and test-driven development, key practices in scaling agile and lean development.
A Little Personal History, Many customers want to buy a product CIS-Discovery Test Guide that offers better service, High salary and well welfare are not a daydream, You will waste more time and spirit too.
Besides, from the CIS-Discovery Reorganizare-Judiciara guidance, you may come up with a few ideas of you own and apply them to your CIS-Discovery Reorganizare-Judiciara study plan, All those beneficial outcomes come from your decision of our CIS-Discovery simulating questions.
The feedback area is available for all the visitors, allowing the freedom of expression, In order to let you have a general idea about our CIS-Discovery test engine, we have prepared the free demo in our website.
Pass CIS-Discovery Exam with Latest CIS-Discovery Test Guide by Reorganizare-Judiciara
When it comes to the CIS-Discovery study materials selling in the market, qualities are patchy, CIS-Discovery latest download demo is available for all of you, We are look forward to become your learning partner in the near future.
If you buy CIS-Discovery exam materials from us, we can ensure you that your personal information will be protected well, All the questions are edited according to the analysis CIS-Discovery Test Guide of data and summarized from the previous test, which can ensure the high hit rate.
Secondly, CIS-Discovery valid test dump is the latest exam torrent you are looking for, At the same time, our APP version of CIS-Discovery study materials support offline learning, Exam CIS-Discovery Simulator which avoids the situation that there is no way to learn without a network.
We have curated all the CIS-Discovery questions and answers that you can view the exam ServiceNow CIS-Discovery brain dumps and prepare for the CIS-Discovery exam, If you are still study hard to prepare the ServiceNow CIS-Discovery exam, you're wrong.
NEW QUESTION: 1
DRAG DROP
Match the Password recovery techniques or command on left with the platform that they are used on right
Answer:
Explanation:
Explanation:
To recover the password on appliances, follow these steps:
Step 1 Reboot the appliance.
The following menu appears:
GNU GRUB version 0.94 (632K lower / 523264K upper memory)
0: Cisco IPS
1: Cisco IPS Recovery
2: Cisco IPS Clear Password (cisco)
Use the
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. IGMP message are encapsulated in PIM register message and send to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
D. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
B. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
C. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
D. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
Answer: A
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
Which class and attribute should you add in the where clause for each collection?
HOTSPOT You manage a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) site. You plan to create two collections named Collection1 and Collection2 that have dynamic membership rules. Collection1 will contain all of the servers in the domain.…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. IGMP message are encapsulated in PIM register message and send to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
D. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
B. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
C. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
D. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
Answer: A
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
Which three tasks should you perform?
Your network contains two Active Directory forests named contoso.com and litwareinc.com. You deploy System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) to the contoso.com forest. You deploy the Configuration Manager client to all of the client computers in…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. IGMP message are encapsulated in PIM register message and send to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
D. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
B. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
C. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
D. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
Answer: A
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
What are two possible ways to achieve the goal?
Your network contains a single Active Directory domain named contoso.com. The domain contains a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) deployment. The relevant servers are configured as shown in the following table. The Configuration Manager deployment…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. IGMP message are encapsulated in PIM register message and send to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
D. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
B. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
C. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
D. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
Answer: A
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
Which network location should you use to start the installation?
HOTSPOT Your network contains a single Active Directory named contoso.com. A System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) primary site named S01 is deployed to contoso.com. The Configuration Manager deployment includes the servers configured as shown in…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. IGMP message are encapsulated in PIM register message and send to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
D. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
B. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
C. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
D. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
Answer: A
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
Which client settings should you configure?
You manage s System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) deployment. You need to ensure that Configuration Manager clients can use the Application Catalog. Which client settings should you configure? A. Software Metering B. Computer Agent C.…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. IGMP message are encapsulated in PIM register message and send to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
D. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
B. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
C. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
D. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
Answer: A
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
Which actions should you initiate from the client computer?
DRAG DROP You have a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) stand-alone primary site. You use Configuration Manager to deploy software updates to client computers. You plan to monitor the software update deployment process from a…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. IGMP message are encapsulated in PIM register message and send to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
D. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
B. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
C. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
D. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
Answer: A
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
What to configure for App1 and Package1.
HOTSPOT You have a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) stand-alone primary site. You have a Configuration Manager application named App1 and a Configuration Manager package named Package1. You need to ensure that App1 and Package1…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. IGMP message are encapsulated in PIM register message and send to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
D. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
B. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
C. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
D. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
Answer: A
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
What should you do?
Your network contains a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) environment. You deploy a Microsoft Office 2010 package to all client computers by using Configuration Manager. Your company purchases Office 2013. You need to ensure that…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. IGMP message are encapsulated in PIM register message and send to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
D. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
B. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
C. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
D. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
Answer: A
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
Which container’s permissions should you modify?
You network has System Center Configuration Manager 2007 R3 deployed. The Active Directory schema is extended for System Center Configuration Manager 2007 R3. You plan to deploy System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) to a new…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. IGMP message are encapsulated in PIM register message and send to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
D. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
B. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
C. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
D. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
Answer: A
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
Which site configuration should you use?
Your company has 120,000 client computers. You plan to deploy System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) to the computers. You need to install Configuration Manager by using the fewest number of sites possible. Which site configuration…