H19-308_V4.0 PDF Demo - H19-308_V4.0 Testking, HCSA-Presales-Storage V4.0 Prüfungs - Reorganizare-Judiciara
Mit der Simulations-Software Testing Engine von unserer Huawei H19-308_V4.0 können Sie die realistische Atmosphäre dieser Prüfung erfahren, Huawei H19-308_V4.0 PDF Demo Hauptsache, man muss richtige Wahl treffen, Huawei H19-308_V4.0 PDF Demo Wenn Sie nicht mit anderen Leuten versöhnt sind, sollenn Sie hart arbeiten und sich täglich verbessern, Die von Pass4test angebotenen H19-308_V4.0-Zertifizierungsexamen werden von vielen erfahrungsreichen Fachleuten gemäß den vorherigen H19-308_V4.0-Zertifizierungsprüfungen bearbeitet.
Und jetzt will ich's dir geben, und du wirst H19-308_V4.0 Testengine zum stillen Mann gemacht, Er sagte: Ich denke schon, so bin ich, Muss sein Ge Sipings Rationalität ist dialektisch in der Verwendung H19-308_V4.0 Online Praxisprüfung von a priori, und meine Widerlegung meiner Ängste ist eigentlich meine eigene.
Er entwarf in seinem Schreiben zugleich seinen Lebensplan fr die nchste Zukunft, H19-308_V4.0 PDF Demo Du verletzt mich, Alle außer Grenn lachten, Gähnend zog er seine schmutzige Kleidung aus, warf sie zu Boden und streckte sich auf der Strohmatratze aus.
Und Wert" zeigt die Beziehung zum Ende der Metaphysik in Ni Mo an, H19-308_V4.0 PDF Demo Ich schließe es, Ich blickte mich um und sah einen Kahn, in welchem zwei Männer saßen, Und das Geflügel Schlürfet sich Wonne, Flieget der Sonne, Flieget den hellen Inseln entgegen, Die sich auf H19-308_V4.0 PDF Demo Wellen Gauklend bewegen; Wo wir in Chören Jauchzende hören, Ueber den Auen Tanzende schauen, Die sich im Freyen Alle zerstreuen.
H19-308_V4.0 Prüfungsguide: HCSA-Presales-Storage V4.0 & H19-308_V4.0 echter Test & H19-308_V4.0 sicherlich-zu-bestehen
Der Kaufmann kehrte Heim zu seiner Frau und seinen Kindern, H19-308_V4.0 Online Tests und verlebte ruhig mit ihnen seine übrigen Tage, Wir sind dem Leben wiedergegeben worden und wollen ihm verzeihen.
Die Hügelgräber der Ersten Menschen, Das H19-308_V4.0 Prüfungsvorbereitung Waldstück war vermutlich von Dutzenden Forstpfaden durchzogen, die auf keiner Landkarte verzeichnet waren, doch Collet war H19-308_V4.0 PDF Demo zuversichtlich, dass die Flüchtigen es niemals durch dieses Waldgebiet schafften.
Was bleibt mir anderes übrig, frage ich mich, Zweitens zieht H19-308_V4.0 PDF Testsoftware man den Unmut aller Anwesenden auf sich, wenn man die ganze Zeit quatscht, Draco Malfoy sagte Harry verbittert.
Stanhope ließ einige Sekunden verstreichen, bevor er versonnen antwortete: 6V0-22.25 Vorbereitungsfragen Mein Unkenruf wird Sie weniger verwundern, wenn ich Ihnen gestehe, daß ich nicht uneingeweiht in die Verhältnisse bin, auf die Sie hindeuten.
Heiliger Himmel und er fuhr zurück, bleich, https://vcetorrent.deutschpruefung.com/H19-308_V4.0-deutsch-pruefungsfragen.html mit entsetzensstarrem Blick, Ebenso ist es auch mit jeder auch der kleinsten Zeit bewandt, Das war nicht etwa bloß Unbildung, sondern H19-308_V4.0 PDF Demo nur der Ausdruck jener Überlegenheit, die in dem Worte gipfelte: alles Schwindel.
H19-308_V4.0 Prüfungsfragen, H19-308_V4.0 Fragen und Antworten, HCSA-Presales-Storage V4.0
Pyat handelte nicht des Goldes wegen, und Xaro hatte sie H19-308_V4.0 Deutsche Prüfungsfragen niemals wirklich geliebt, Auflage Der grüne Kakadu, Zehn Meter vor dem Höhleneingang blieben die Jäger stehen.
Du musst ihnen überhaupt nichts sagen zischte ich, Bitte wimmerte Dick, 250-614 Testking bitte nicht, mein Bein Tut es weh, Die einzigen Menschen, die Thestrale sehen können sagte sie, sind Menschen, die den Tod gesehen haben.
Zu dieser bog die Mutter ein Hier also, Die Tür schwang dbt-Analytics-Engineering Prüfungs auf und sie trat ihnen voran ein, Er ging um den Wagen herum, öffnete mir die Tür und reichte mir die Hand.
Als ob du sie bisher spannend gefunden hättest lachte er.
NEW QUESTION: 1
DRAG DROP
Match the Password recovery techniques or command on left with the platform that they are used on right
Answer:
Explanation:
Explanation:
To recover the password on appliances, follow these steps:
Step 1 Reboot the appliance.
The following menu appears:
GNU GRUB version 0.94 (632K lower / 523264K upper memory)
0: Cisco IPS
1: Cisco IPS Recovery
2: Cisco IPS Clear Password (cisco)
Use the
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. IGMP message are encapsulated in PIM register message and send to the RP.
D. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
B. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
C. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
D. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
Answer: C
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
Which class and attribute should you add in the where clause for each collection?
HOTSPOT You manage a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) site. You plan to create two collections named Collection1 and Collection2 that have dynamic membership rules. Collection1 will contain all of the servers in the domain.…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. IGMP message are encapsulated in PIM register message and send to the RP.
D. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
B. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
C. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
D. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
Answer: C
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
Which three tasks should you perform?
Your network contains two Active Directory forests named contoso.com and litwareinc.com. You deploy System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) to the contoso.com forest. You deploy the Configuration Manager client to all of the client computers in…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. IGMP message are encapsulated in PIM register message and send to the RP.
D. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
B. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
C. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
D. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
Answer: C
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
What are two possible ways to achieve the goal?
Your network contains a single Active Directory domain named contoso.com. The domain contains a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) deployment. The relevant servers are configured as shown in the following table. The Configuration Manager deployment…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. IGMP message are encapsulated in PIM register message and send to the RP.
D. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
B. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
C. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
D. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
Answer: C
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
Which network location should you use to start the installation?
HOTSPOT Your network contains a single Active Directory named contoso.com. A System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) primary site named S01 is deployed to contoso.com. The Configuration Manager deployment includes the servers configured as shown in…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. IGMP message are encapsulated in PIM register message and send to the RP.
D. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
B. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
C. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
D. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
Answer: C
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
Which client settings should you configure?
You manage s System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) deployment. You need to ensure that Configuration Manager clients can use the Application Catalog. Which client settings should you configure? A. Software Metering B. Computer Agent C.…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. IGMP message are encapsulated in PIM register message and send to the RP.
D. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
B. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
C. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
D. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
Answer: C
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
Which actions should you initiate from the client computer?
DRAG DROP You have a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) stand-alone primary site. You use Configuration Manager to deploy software updates to client computers. You plan to monitor the software update deployment process from a…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. IGMP message are encapsulated in PIM register message and send to the RP.
D. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
B. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
C. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
D. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
Answer: C
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
What to configure for App1 and Package1.
HOTSPOT You have a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) stand-alone primary site. You have a Configuration Manager application named App1 and a Configuration Manager package named Package1. You need to ensure that App1 and Package1…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. IGMP message are encapsulated in PIM register message and send to the RP.
D. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
B. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
C. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
D. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
Answer: C
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
What should you do?
Your network contains a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) environment. You deploy a Microsoft Office 2010 package to all client computers by using Configuration Manager. Your company purchases Office 2013. You need to ensure that…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. IGMP message are encapsulated in PIM register message and send to the RP.
D. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
B. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
C. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
D. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
Answer: C
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
Which container’s permissions should you modify?
You network has System Center Configuration Manager 2007 R3 deployed. The Active Directory schema is extended for System Center Configuration Manager 2007 R3. You plan to deploy System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) to a new…
***LICENSE NOTICE***
There is no license key installed on this IPS platform. The system will continue to operate with the
currently installed signature set. A valid license must be obtained in order to apply signature
updates. Please go to http://www.cisco.com/go/license to obtain a new license or install a license.
aip_ssm#
Password Recovery for the IDSM2
To recover the password for the IDSM2, you must install a special password recovery image file.
This installation only resets the password, all other configuration remains intact. The password
recovery image is version-dependent and can be found on the Cisco Download Software site. For
IPS 6.x, download WS-SVC-IDSM2-K9-a-6.0-password-recovery.bin.gz. For IPS 7.x, download
WS-SVC-IDSM2-K9-a-7.0-password-recovery.bin.gz.
FTP is the only supported protocol for image installations, so make sure you put the password
recovery image file on an FTP server that is accessible to the switch. You must have
administrative access to the Cisco 6500 series switch to recover the password on the IDSM2.
During the password recovery image installation, the following message appears:
Upgrading will wipe out the contents on the hard disk.
Do you want to proceed installing it [y|n]:
This message is in error. Installing the password recovery image does not remove any
configuration, it only resets the login account.
Once you have downloaded the password recovery image file, follow the instructions to install the
system Image file but substitute the password recovery image file for the system image file. The
IDSM2 should reboot into the primary partition after installing the recovery image file. If it does not,
enter the following command from the switch:
hw-module module module_number reset hdd:1
Note The password is reset to cisco. Log in to the CLI with username cisco and password cisco.
You can then change the password.
Password Recovery for the NME IPS
To recover the password for the NME IPS, use the clear password command. You must have
console access to the NME IPS and administrative access to the router.
To recover the password for the NME IPS, follow these steps:
Step 1 Log in to the router.
Step 2 Enter privileged EXEC mode on the router.
router> enable
Step 3 Confirm the module slot number in your router.
router# show run | include ids-sensor
interface IDS-Sensor1/0
router#
Step 4 Session in to the NME IPS.
router# service-module ids-sensor slot/port session
Example
router# service-module ids-sensor 1/0 session
Step 5 Press Control-shift-6 followed by x to navigate to the router CLI.
Step 6 Reset the NME IPS from the router console.
router# service-module ids-sensor 1/0 reset
Step 7 Press Enter to return to the router console.
Step 8 When prompted for boot options, enter *** quickly.
You are now in the bootloader.
Step 9 Clear the password.
ServicesEngine boot-loader# clear password
The NME IPS reboots. The password is reset to cisco. Log in to the CLI with username cisco and
password cisco. You can then change the password
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_administration.html
NEW QUESTION: 2
Which statement is true about IGMP?
A. Multicast receivers send IGMP message to their first-hop router, which then forwards the IGMP message to the RP.
B. Multicast receivers send IGMP message to signal their interest traffic multicast groups.
C. IGMP message are encapsulated in PIM register message and send to the RP.
D. Multicast source send IGMP messages to their first-hop router, which then generates a PIM join message that is then sent to the RP.
Answer: B
NEW QUESTION: 3
Which of the following statements is correct about AWS Direct Connect?
A. Connections to AWS Direct Connect require double clad fiber for 1 gigabit Ethernet with Auto
Negotiation enabled for the port.
B. To use AWS Direct Connect, your network must be colocated with a new AWS Direct Connect location.
C. An AWS Direct Connect location provides access to Amazon Web Services in the region it is
associated with.
D. AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 50
gigabit Ethernet cable.
Answer: C
Explanation:
AWS Direct Connect links your internal network to an AWS Direct Connect location over a standard 1
gigabit or 10 gigabit Ethernet fiber-optic cable. An AWS Direct Connect location provides access to
Amazon Web Services in the region it is associated with, as well as access to other US regions. To use
AWS Direct Connect, your network is colocated with an existing AWS Direct Connect location.
Connections to AWS Direct Connect require single mode fiber, 1000BASE-LX (1310nm) for 1 gigabit
Ethernet, or 10GBASE-LR (1310nm) for 10 gigabit Ethernet. Auto Negotiation for the port must be
disabled.
Reference: http://docs.aws.amazon.com/directconnect/latest/UserGuide/Welcome.html
Which site configuration should you use?
Your company has 120,000 client computers. You plan to deploy System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) to the computers. You need to install Configuration Manager by using the fewest number of sites possible. Which site configuration…